Adapter and Battery Information, AC adapter

Adapter and Battery Information

AC adapter

Part number	PS-0035
Input voltage	120V AC, 60 Hz
Output voltage	8V AC @ 300mA

xxUse only the supplied AC adapters.

xxUse the proper adapter for the base & any chargers.

xxDo not place the unit in direct sunlight or subject it to high temperatures.

Battery pack (with normal use)

Part number	BT-1021
Capacity	300mAh, 2.4V DC
Talk time	about 7 hours
Standby time	about 7 days
Battery life	about 1 year

xxReplace the battery when the talk or standby time becomes noticeably re- duced. For replacements, call the Parts Department (see the front cover).

xxWhen the battery gets low, the handset beeps and shows a low battery alert; put the handset in the cradle for recharging.

Rechargeable Battery Warning

xxThis equipment contains a recharge- able Nickel-Metal-Hydride (Ni-MH) battery.

xxNickel is a chemical known to the state of California to cause cancer.

xxDo not short-circuit the battery.

xxThe batteries in this equipment may explode if disposed of in a fire.

xxDo not charge the batteries in any charger other than the one specified in the owner's manual. Using another charger may damage the battery or cause it to explode.

20 -English

xxAs part of our commitment to protecting our environ-

ment and conserving natural resources, Uniden voluntarily participates in an RBRC® industry program to collect and

recycle used Ni-MH batteries within the United States. Please call

1-800-8-BATTERY for information on Ni-MH battery recycling in your area. (RBRC® is a registered trademark of the Rechargeable Battery Recycling Corporation.)

Rechargeable batteries must be recycled or disposed of properly.

Warning! The cords on this product and/or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling.

Uniden works to reduce lead content in our products & accessories.

Compliance Information

FCC Part 68 Information

This equipment complies with Part

68 of the FCC rules and the require- ments adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information,

a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the phone company.

An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to