♦♦ Handsets that aren’t registered display a Not Registered message. For registration instructions, see page 25, or see the accessory handset manual.
♦♦ If a handset was ever registered to a base, you must reset it before it can register to a new base; see page 25, or see the accessory handset manual.
Conference Calling
♦♦ When an outside call comes in on the land line, four handsets can join in a conference call with the outside caller.
♦♦ To join a call that’s already in progress, just press HOME/FLASH or Speaker.
♦♦ To leave the conference call, hang up normally; the other handsets remain connected to the call.
Call Transfer
To... | On the land line | Using CellLink | |
| Press Intercom/Clear, then select the handset you | ||
transfer a call | want to transfer the call to (select ALL to page all the | ||
handsets). When the other handset accepts the call, | |||
| |||
| you’ll be disconnected. |
| |
cancel a transfer and | Press End. |
| |
leave the call on hold |
| ||
|
| ||
return to the call | Press Home/Flash. | Press Cell. | |
| 1. Press Intercom/Clear. You can speak to the | ||
answer a call transfer | transferring handset. |
| |
page | 2. To speak to the outside caller, | ||
| Press Home/Flash. | Press Cell. | |
Privacy Mode
To activate privacy mode on a land line call in progress, press Menu/select. The current call privacy mode displays as a menu selection. If you want to change the privacy mode, select it. As long as privacy mode is on, you'll see a P in the display,
and no other handsets can join your call. Privacy mode turns off automatically when you hang up; you can also turn it off by pressing Menu/select twice.
Intercom
♦♦ Whenever the phone is in standby, you can make an intercom call between handsets without using the phone line.
♦♦ You can make an intercom call from any handset, but only two handsets can be in an intercom call at any time.
♦♦ If an outside call comes in during an intercom page, the phone cancels the page so you can answer the incoming call.
18 - English