Uniden D3580 manual Using the System While Youre Away from Home, Screening Your Calls

To...	From the base	From a handset
delete a	While a message is playing, press	While a message is
		playing, select 4 (number
message	Delete.
		key).
delete all	With the phone in standby, press	Not available.
messages	Delete; press Delete again to confirm.
play old	After the system plays all new messages,
messages	press Play/stop again.	select 2 (number key).
stop playback	Press Play/stop.	Select 5 (number key).

Screening Your Calls

You can use the answering system for call screening. While the system takes a message, you can listen on the base speaker (if you turn on Call Screen) or from a handset. Only one handset can screen calls at a time. If another handset tries to screen calls, it beeps and returns to standby.

To...	From the base	From a handset
hear the caller leaving a	Listen to the caller over	Press Message/mute.
message	the speaker.
answer the call	NA	Press HOME/flash.
mute the call screen	Press Play/stop.	Press End or return the
without answering*		handset to the cradle.

*If you mute the call screen, the system continues taking the message: it just stops playing through the speaker.

Using the System While You're Away from Home

You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code.

Programming a Security Code

With the phone in standby, open the menu; select Answering Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you’re finished.

##Remember to make a note of your new security code!

Dialing In to Your System

1.Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.)

2.During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby.

22 - English