Uniden DECT1480 manual Using Special Features, Finding a Lost Handset, Chain Dialing

If you need the phone to pause before sending the next set of digits,

press Redial/pause to insert a 2-second pause. The pause shows as a P in the display.

You can insert as many pauses as you need, but each pause counts as one of your 20 digits.

Phonebook Entry Options

With the phone in standby, open the phonebook and find the entry you want. Press Menu/select to open the individual phonebook entry menu. The phone prompts you to edit or delete the entry.

Finding a Lost Handset

With the phone in standby, press Find on the base. All the handsets will beep in a 3-beep pattern for 1 minute or until you press Find again. You can also end the page by pressing any key from the found handset.

Using Special Features

Chain Dialing

If you often have to enter a series of digits or a code number during a call, you can save that code number to a phonebook entry and use the phonebook to send the code number.

1.Enter the code number (up to 20 digits) into the phonebook just like a regular phonebook entry. Be sure to enter the code number into the phonebook exactly as you would enter it during a call.

2.When you hear the prompt that tells you to enter the number, open the phonebook and find the entry that contains your code number. Press Menu/select to transmit the code. The phone transmits the code number entered in the previous step. If you change your mind, use Phonebook/left to close the phonebook.

Multihandset Features

Conference Calling

When an outside call comes in, two handsets can join in a conference call with the outside caller.

13