Uniden DCX200 Series owner manual Accessing Voicemail, Accessing Your Answering System

Accessing Voicemail

If your base doesn't have an answering system and you subscribe to a voice mail service, you can program your handset to automatically dial the access number.

) Press [Menu/Select].

2)Move the cursor to HANDSET SETUP and press [Menu/Select].

3)Move the cursor to EDIT VOICE MAIL and press [Menu/Select].

4)Enter your access number (up to twenty digits). If you need the phone to wait before sending the next digits, press [Redial/Pause] to insert a two-second pause. For a longer pause, press [Redial/Pause] multiple times. Each pause counts as one digit.

5)Press [Menu/Select] when you are finished.

Once you program your access number, press [/Mute] to dial your voice mail service.

Accessing Your Answering System

If your base has an answering system, you can use your handset to get your messages and change your answering system setup. You have the following options:

Play	Press [	/Mute]. The system announces the number of
messages	new and old messages and plays the message.
Repeat a	Press [	] to go to the start of the current message.
	Press [	] repeatedly to go back to a previous
message
	message.
Skip a	Press [	] to go to the beginning of the next message.
message
Delete a	While a message is playing, press [ ].
message	The message is permanently deleted.
Exit and	Press [	] to exit the system and return to standby.
hang up

15