Compatible Bases, Installing the Battery

Compatible Bases

This handset is compatible with Uniden's 1.9 GHz DECT6.0 Expandable phone system: the DECT2000 series.

Please visit our website at www.uniden.com for the most up-to- date list of compatible bases.

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any items are missing or damaged, contact our Customer Service Hotline. See inside the back cover page for contact information.

• Cordless Handset	• Belt Clip
• Charger	• Printed Material

•AC Adapter (model # AD-0005: Input 120V AC, 60 Hz; Output 9V DC, 210 mA)

•Rechargeable NiMH Battery Pack (model # BT-1008: Capacity 650 mAh, 2.4V)

Installing the Battery

Follow the steps below to install the rechargeable battery pack.

) Using the finger indentation, press in on the battery case cover and slide it down to remove it.

2) Plug the battery connector into the

battery compartment jack. Be sure to

match the red and black wires to the label near the jack.

3) Gently pull on the battery wires. If the

battery connector comes loose, try connecting it again.

4) Replace the battery case cover and slide it up until it clicks into place.

Note: Use only the Uniden BT-1008 rechargeable battery pack supplied with your cordless telephone.