Sheet 4, 08IMI-685, Wiring | Cooper Lighting guide

INSTALLATION INSTRUCTIONS

IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.

Tribute

Sheet 4 of 4

1/7/08IMI-685

6.Light Distribution Some of the reflector options are directional oriented. The reflector can be rotated in 90° increments. Loosen reflector mounting screws and rotate reflector to desired orientation and then retighten the mounting screws. FIG. 6. Tools required 1/4" socket.

7.Wiring

Important: Dual voltage and multi-tap ballasts are factory-wired for 277V input. Before installation make certain supply and ballast voltages are compatible. For use with other line voltages, remove wire nut splicing the black lead from the quick disconnect plug and 277V lead from ballast. Cap off 277V lead with wire nut. Splice black lead from the quick disconnect plug with desired voltage lead from ballast.

Wire leads are to be routed from housing to pole. All wiring connections are to be made in the pole. Wire the fixture voltage leads to the supply voltage lead; fixture common lead to the supply neutral lead; and the fixture ground lead to the supply ground lead. If fixture is supplied with the ballast tray option, re-connect the polarized plug and replace the ballast tray.

8.Photocontrol Receptacle Loosen the two flathead screws to allow rotation of the receptacle. Insert screwdriver into center slot and rotate receptacle until indicator arrow points north. Retighten screws. Plug the photoelectric control into receptacle and twist into locked position.

The photocontrol must contain a soft, resilient gasket fastened to the bottom surface to assure a proper weather seal between the control and the receptacle.

NOTE: The orientation procedure is only required for photocontrols which specifically require the cell to be aimed north. Otherwise factory orientation will work. Follow the directions recommended by the supplier of the photocontrol for proximity to light sources. Lighted signs, building surface reflection, floodlights, tree branches, etc. May affect final position of the photocontrol. FIG. 7

9.Lamp installation Open fixture door. Install the lamp by grasping it close to the base and rotating clockwise, tightening securely to engage socket center contact. Close the fixture door.

NOTE: Do not use lubricants on lamp base or socket as this will cause damage and void warranty.

10.Reflector and Lens Cleaning Open fixture door, dust reflector with soft, clean dry cloth. Do not use alkaline or acidic cleaners on reflector surfaces. Clean lens with non-abrasive glass cleaning solution.

NOTE: A regular maintenance schedule should be followed to retain optimal light output and reduce heat retention.

FIG. 6

FIG. 7

Loosen

These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please contact your nearest representative.

NOTE: Specifications and dimensions subject to change without notice.

Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770.486.4801 ADH070937

IMI-685 specifications

Cooper Lighting’s IMI-685 is a cutting-edge recessed lighting solution that effortlessly blends aesthetics with high-performance functionality. Designed with versatility and efficiency in mind, the IMI-685 is perfect for a wide variety of applications, including residential, commercial, and institutional spaces.

One of the standout features of the IMI-685 is its innovative LED technology. Utilizing energy-efficient LEDs, this recessed fixture provides excellent illumination while significantly reducing energy consumption compared to traditional lighting options. The IMI-685 boasts a long lifespan, which not only minimizes maintenance costs but also contributes to sustainability efforts by decreasing waste.

The IMI-685 is equipped with a range of lumen output options, ensuring that users can achieve the desired brightness and ambiance for any environment. With adjustable lumens, users can select between different power levels to suit their specific lighting needs. This flexibility is particularly beneficial in spaces where lighting requirements may vary, allowing for tailored solutions.

Another remarkable characteristic of the IMI-685 is its sleek, low-profile design. The fixture seamlessly integrates with various ceiling types, providing a clean and unobtrusive look that complements contemporary architecture. The trim options available allow for further customization, enabling users to match their lighting to existing decor.

The IMI-685 also features advanced dimming capabilities, making it ideal for creating desirable lighting effects in different settings. With compatibility for various control systems, including dimmers and smart home technology, users can easily manage light levels and enhance the mood of their space.

In addition to its aesthetic appeal and flexible performance, the IMI-685 prioritizes safety and compliance with industry standards. The fixture has undergone rigorous testing to ensure it meets or exceeds the necessary safety regulations, providing peace of mind to both installers and end-users.

Overall, Cooper Lighting’s IMI-685 is an exemplary choice for anyone seeking an efficient, versatile, and stylish lighting solution. With its combination of energy efficiency, design flexibility, and smart technology integration, the IMI-685 represents the future of recessed lighting, making it an excellent investment for modern illumination needs.