Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches on the base top.
2) Plug the AC adapter into the DC IN 9V jack.
3) Wrap the AC adapter cord inside the molded wiring channel as shown.
4)Plug the AC adapter into a standard 120V AC wall outlet.
5) Plug the telephone line cord into the TEL LINE jack.
Wrap the cord inside the molded wiring channel as shown.
6) Plug the telephone line cord into the telephone outlet.
7) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.
!
DO NOT use an AC outlet controlled by a wall switch.
[ 1 1 ] Mounting the Base Unit on a Wall | w w w . u n i d e n . c o m |