Recording a phone conversation
You can record a phone conversation with your handset or base. The conversation has to last more than two seconds and less than ten minutes. During a conversation, press menu/select. Use the up/down key to select Call Record. The handset or the base sounds a confirmation tone that can be heard by both parties and displays Recording a call. When you want to stop recording, press menu/select and select Call Record again.
Screening Calls
You can screen calls from the base: just let the answering machine answer the call and listen to the caller leave a message. Answer the phone if you want to talk to
the caller. To mute the call screen, press | . |
If you turn on the call screen feature (see page 68), you can also screen calls from the handset. Let the answering machine answer the call, then press the volume up key. If you want to talk to the caller, just press talk/flash, or 
/flash on the base and the answering machine will stop recording. To mute the call screen, press end.
note 
•If the recording memory is full,
Unavailable appears
in the display. You can not record a conversation until you clear some messages from the memory.
•Every state has different regulations governing the recording of conversations over the telephone. Make sure to check your local, state and federal laws before using this product to record any telephone conversation in order to determine that your use is in compliance with such laws or guidelines.
•You can not record intercom conversations.
•Only one handset can screen calls at a time. If another handset is screening the call, you'll just hear a beep when you try to screen the call, too.
[ 7 3 ] Answering Machine | w w w . u n i d e n . c o m |