Uniden ELBT 585 owner manual Remote Operation

Remote Operation

You can check, play, or delete messages when you are away from home. You can also record your own greeting message. To access your answering machine remotely, you need a touch tone telephone and a two-digit security code (see Setting a Security Code on page 66).

1)Call your telephone number and wait for the system to answer. If Toll Saver is enabled, answering machine will answer in 2 rings if you have new messages and 4 rings if you don't. If the answering machine is off, it will answer after about 10 rings and sound a series of beeps.

2)During the greeting message (or a series of beeps when the answering machine is off), press 0 and enter your security code within two seconds.

3)The answering machine announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero." Then, you'll hear a beep.

4)Enter a command from the following chart within 15 seconds. After the first command, you have two seconds to enter each command.

note

•The system will only play back messages for four minutes and then it returns to the command waiting mode.

•To continue playing your messages, press 0 then 2 again within 15 seconds.

•If you enter an incorrect security code three times, you will hear a beep and the system will return to standby.

•For your convenience, a remote operation card is provided for you to use while away from home (refer to page 96).

[ 7 5 ] Answering Machine w w w . u n i d e n . c o m