Uniden DECT2180 Series manual Using Your Phone, Using the Base Speakerphone, Changing the Volume

Page 12

Using Your Phone

	To...	From the handset	From the handset speakerphone
	make a call: Dial the	Press Talk/flash.	Press Speaker.
	number, then	Press Talk/flash.	Press Speaker.
	number, then

	answer a call	Press Talk/flash.	Press Speaker.

	hang up	Press End or put the handset in the cradle.

	switch between the	Press Speaker.
	speaker & earpiece	Press Speaker.
	speaker & earpiece
	mute the microphone	Press messages/mute. Press again to turn the
	during a call	microphone back on.
	put a call on hold	Press Clear/intercom. After 5 minutes on hold, the
	put a call on hold	call will be disconnected.
		call will be disconnected.
	return to a call on hold	Press Talk/flash.	Press Speaker.

	mute the ringer for this	While the phone is ringing, press messages/mute.
	call only

Using the Base Speakerphone

The base speakerphone lets you use the following features:

Answer a call	Press Speaker.

Hang up	Press Speaker.

Put a call on hold	Press Find Handset/intercom twice.

Return to a call on hold	Press Speaker.

Changing the Volume

You can set the volume of the ringer and speaker separately for the base and each handset; you can also set the earpiece volume on each handset. For each item, press Up to make it louder or Down to make it softer. The available volume levels and how change them are listed below:

Change the	When	On the base	On a handset

ringer	the phone is in	select Off, Low,	select Off, Low,
volume	standby	Medium, or High	Medium, or High

10

Image 12

Contents DECT2180 Series Users Guide Whats in the box?You might also find Important Safety Instructions Whats in the manual?Installing Your Phone Charge the BatteryConnect the Telephone Cord Test the connectionMake a quick test call. Press End to hang up TryGetting to Know Your Phone Parts of the BaseParts of the Handset Handset keys and how they work Key nameDuring text entry move the cursor to the right Reading the Display On the baseOn the handset Icon What it meansUsing the Handset Menu Ans. Setup Menu By pressing a key on the twelve-key dial padEntering Text on Your Phone Follow these stepsUsing Your Phone Using the Base SpeakerphoneChanging the Volume Base speakerphone lets you use the following featuresUsing the Redial List Using Caller ID and Call WaitingDialing from the Caller ID list Using Seven-Digit Dialing Using Call WaitingCaller ID menu options Add the number to the call block list seeUsing the Phonebook Chain DialingPhonebook menu options Phonebook entry optionsUsing Special Features Using Do Not DisturbUsing Call Block Finding a Lost HandsetUsing Voice Message Notification Resetting the voice message indicatorCall Blocking menu options Call block entry optionsUsing Multi-station Features Using Conference CallingUsing Privacy Mode Expanding Your PhoneUsing Call Transfer Using the IntercomFrom the base From a handset Using the Answering System Setting Up Your Answering SystemAns. Setup menu options You can set up your answering system from any handsetAccessing your answering system from a handset Getting Your MessagesHow to operate your answering system Screening Your CallsFrom the base From a handset remote Operation Using the System While Youre Away from Home Programming a security codeDialing in to your system With the phone in standby, open the menu from any handsetSolving Problems If… Try…Unavailable Adjust the audio tone Weak or Hard To Hear AudioAnnounce Only Here are some hints for when the static is Installing a line filter or DSL filterNoise or Static On The Line On 1 handset or in 1 locationResetting and Registering Handsets System Reset menuChanging from Tone to Pulse Dialing Do you have the base the handset is registered to? YesHandling Liquid Damage Registering a handsetMoisture and liquid can damage your cordless phone Does the handset fit in the base cradle? YesImportant Information Terms Used In This GuideCompliance information FCC Part 15 information One-year Limited Warranty