Uniden DECT2180 Series manual Installing Your Phone, Charge the Battery

Page 3

Installing Your Phone

Charge the Battery

1) Unpack all handsets, battery packs, and

battery covers. If any battery cover is already on the handset, press in on the notch and slide the cover down and off.

Black Red

2)Line up the red and black wires on the battery pack with the label inside the handset.

3)Push the connector in until it clicks into place; tug gently on the wires to make sure the battery pack is securely connected.

4) Place the cover over the battery

compartment and slide it up into place.

5) Connect the base AC adapter to the AC IN 7.8V jack on the rear of the base. Route

the cord through the molded wiring channel as shown.

6) If you have accessory handsets, connect a

charger AC adapter to each charger's AC IN 8V

jack and set the plug into the notch as shown. (These adapters might already

be connected.)

7) Plug the other end of each adapter into a standard 120V AC power outlet.

Image 3

Contents DECT2180 Series Users Guide Whats in the box?You might also find Whats in the manual? Important Safety InstructionsCharge the Battery Installing Your PhoneTry Connect the Telephone CordTest the connection Make a quick test call. Press End to hang upParts of the Base Getting to Know Your PhoneParts of the Handset Handset keys and how they work Key nameDuring text entry move the cursor to the right Icon What it means Reading the DisplayOn the base On the handsetUsing the Handset Menu By pressing a key on the twelve-key dial pad Ans. Setup MenuFollow these steps Entering Text on Your PhoneBase speakerphone lets you use the following features Using Your PhoneUsing the Base Speakerphone Changing the VolumeUsing the Redial List Using Caller ID and Call WaitingDialing from the Caller ID list Add the number to the call block list see Using Seven-Digit DialingUsing Call Waiting Caller ID menu optionsPhonebook entry options Using the PhonebookChain Dialing Phonebook menu optionsFinding a Lost Handset Using Special FeaturesUsing Do Not Disturb Using Call BlockCall block entry options Using Voice Message NotificationResetting the voice message indicator Call Blocking menu optionsExpanding Your Phone Using Multi-station FeaturesUsing Conference Calling Using Privacy ModeUsing Call Transfer Using the IntercomFrom the base From a handset You can set up your answering system from any handset Using the Answering SystemSetting Up Your Answering System Ans. Setup menu optionsGetting Your Messages Accessing your answering system from a handsetHow to operate your answering system Screening Your CallsFrom the base From a handset remote Operation With the phone in standby, open the menu from any handset Using the System While Youre Away from HomeProgramming a security code Dialing in to your systemSolving Problems If… Try…Unavailable Adjust the audio tone Weak or Hard To Hear AudioAnnounce Only On 1 handset or in 1 location Here are some hints for when the static isInstalling a line filter or DSL filter Noise or Static On The LineDo you have the base the handset is registered to? Yes Resetting and Registering HandsetsSystem Reset menu Changing from Tone to Pulse DialingDoes the handset fit in the base cradle? Yes Handling Liquid DamageRegistering a handset Moisture and liquid can damage your cordless phoneTerms Used In This Guide Important InformationCompliance information FCC Part 15 information One-year Limited Warranty