Uniden DECT2180 Series manual Using the Answering System, Setting Up Your Answering System

Using the Answering System

Setting Up Your Answering System

You can set up your answering system from any handset.

To...	Follow these steps
	Your greeting can be between 2 seconds and 30 seconds
	long. If you don't record an outgoing message, the system
	uses a pre-recorded greeting: Hello, no one is available to
	take your call. Please leave a message after the tone.
Record your	1.	Press Messages/mute to access the answering system. Wait
personal		until the system finishes its announcements, or press 5
		(stop) to skip them.
outgoing
	2.	Press 8.
message or
	3.	Wait for the system to say "Record greeting," then begin
greeting
		speaking.
	4.	When you're finished, press 8 to stop recording. The
		system plays back your new greeting.
	5.	To keep this greeting, press End. To re-record it, go back to
		step 2.
Switch	1.	Press Messages/mute to access the answering system. Wait
between the		until the system finishes its announcements, or press 5
pre-recorded		(stop) to skip them.
greeting &	2.	Press 6. The system plays back the greeting it is currently
your own		using.
greeting	3.	Press 6 again to switch greetings.
Delete your	1.	Switch to your personal greeting following the steps above.
greeting	2.	While the system is playing back your greeting, press 4.

Ans. Setup menu options

You can change the answering system options from any handset. Just open the menu and select Ans. Setup.

Security Code	Enter a 2-digit PIN so you can access your answering
	system from any touch-tone phone (see page 21).
	Set the number of rings (2, 4, or 6) before the answering
Ring Time	system answers the phone. Choose Toll Saver (TS) to
	have the system pick up after 2 rings if you have new
	messages or after 4 rings if you don't.

18