You hear a confirmation tone followed by the announcement "Time," and the day and time are then announced for your review. After a few seconds, the system announces "To set security code, press menu again."
Note:
•Normally, the system will return to standby if it remains idle for 10 seconds after [vol/select/] or
[vol/select/] is pressed. For setting the time, however, the idle time is extended to two minutes.
•Press and hold [vol/select/] or [vol/select/
] to quickly scroll through the numbers on the display.
Setting a Personal Security Code (PIN)
If you want to be able to play your messages from a remote location, you need to enter a
To select a PIN, perform the following steps:
1)With the phone in standby, press [menu/clock] twice.
The system announces "Security code," and the current PIN code is announced as it is displayed on the base. Then the system announces the instructions for setting the PIN code.
2)Press [vol/select/] or [vol/select/
] until the desired number appears.
3)Press [set] to select the PIN code. You hear a confirmation tone, then the announcement "Security code" followed by the new PIN code is announced. After a few seconds, the system announces "To set ring time, press menu again."
Note: The PIN code is set to "80" at the factory.
35