2)Press [vol/select/
] or [vol/select/
] until the desired time appears.
3)Press [set] to select the new recording time. You hear a confirmation tone, then the announcement "Record time" followed by the new recording time. After a few seconds, the system announces "To set message alert, press menu again."
Note: After setting the Announce only feature, you may want to change your outgoing message not to prompt the caller to leave a message. However, the prerecorded message changes automatically.
Setting the Message Alert Tone
The message alert tone beeps every 15 seconds whenever you have unheard messages. The tone turns off automatically after you listen to all your new messages. You can also turn off the message alert tone by pressing any key on the base.
Follow the steps below to turn on the message alert tone:
1)With the phone in standby, press [menu/clock] five times. You hear "Message alert" and the current setting
([ 
] Off or [ 
] On), and it is displayed on the base. Then you hear the instructions for setting the Message Alert.
2)Press [vol/select/
] or [vol/select/
] to make your selection.
3)Press [set] to select the new setting. You hear a confirmation tone, then the announcement "Message alert" followed by the current setting you have selected is announced. After a few seconds, the system announces "To set language, press menu again." When the first new message is received, the alert tone will begin to sound.
37