Uniden DSS7815 Series Setting Name Tag, Setting the Insert Zero, Vol/ or /vol/ to select On or

Setting Name Tag
The Name Tag feature works with the Caller Display number from Caller ID. A subscription
to this service is required from your network provider. There is usually a fee for this service.
When the phone rings the caller display number, when received will be compared to
numbers stored in the phonebook. If there is a match any name stored with the phonebook
number will be displayed.
1) Press the MENU soft key. Select the Global Setup menu,
			Name Tagging
and then the Name Tag submenu.		On
2) Press	/vol/ or /vol/ to select On or	Off
		BACK		OK
Off (the initial setting is On).

3)Press the OK soft key.

You will hear a confirmation tone.

Setting the Insert Zero

This feature adds '0' or '00' to the number, when you receive Caller ID messages. The default setting for New Zealand is On. The default setting for Australia is Off.

1) Press MENU soft key. Select the Global Setup menu,
			Insert 0
and then the Insert 0 submenu.		On
2) Press	/vol/ or /vol/ to select On or Off.	Off
		BACK		OK

3)Press the OK soft key.

You will hear a confirmation tone.

[25]