4)Press OK soft key to store the name; Store/Edit No. appears.
5)Use the number keypad, 
/tone/ or #/ 
to enter the phone number (up to 20 digits). If you make an error, use the DELETE soft key to erase the incorrect digits. When you are finished, press the OK soft key to store the number.
6)Distinctive Ring appears. Press 
/vol/ 
or
/vol to move the pointer to one of the
Distinctive Ring options and then press the OK soft key.
7)Speed Dial appears. Press 
/vol/ 
or 
/vol 
To move the pointer to select the Speed dial location (10 locations:
Store/Edit No. 8009675543
DELETE PAUSE OK
Distinctive Ring
No Selectn
Flicker
BACKOK
Speed Dial
No Selectn
SPD1:<Empty>
BACKOK
If you choose not to store a Distinctive Ring, simply select the "No selection" option.
If you choose not to store the name/number as a speed dial simply choose the "No selection" option.
PHONEBOOK
8)Press the OK soft key. You will hear a confirmation tone, and Done! appears in the display.
Chain Dialing
Movies
8007303456
Beethoven9/SPD1
BACK DELETE EDIT
The memory locations in the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example of this is a bank account number. Store the account number in one of the phonebook locations (refer to "Phonebook (Storing Phone Numbers, Names, Distinctive Rings and Speed Dial)" on page 35). When you call your bank and are prompted to enter the
account number, scroll through your phonebook locations until you find your account number, and then press the DIAL soft key.
[36]