Uniden EZAI2997 Series Changing from Tone to Pulse Dialing, Resetting and Registering Handsets

Page 27

Plug the DSL filter into the telephone	Telephone
wall jack and then plug your phone's	wall jack
base into the filter. Make a test call to
make sure the noise is gone.	Telephone
	Telephone
	cord
	DSL lter

Changing from Tone to Pulse Dialing

Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most telephone companies use tone dialing. If your phone company uses pulse dialing, you need to change the dial mode.

) With the phone in standby, open the menu and select Global Setup.

2)Select Dial Mode, then select Pulse. The phone sounds a confirmation tone.

If you use pulse dialing and you need to send DTMF tones during a call (if you're using an automated response system, for example), press to temporarily switch to tone dialing. When the call ends, the phone automatically returns to pulse dialing mode.

Resetting and Registering Handsets

If you are having trouble with a handset or if you want to replace one, you need to clear the registration information from the base and the handset:

Do you have the base the handset is registered to?

Yes		No

1. Press and hold Flash/exit and Pound (#) until	1.	Press and hold Flash/
the System Reset menu appears (about 5		exit and Pound (#) until
seconds).		the System Reset menu
2. Select Deregister HS. The display lists all		appears (about 5 seconds).
registered handsets.	2.	Select Base Unavailable.
3. Select the handset you want to reset.	3. When the phone asks you
4. When the phone asks you to confirm, select		to confirm, select Yes. The
Yes. The handset clears its information from		handset deletes its own link
the base and deletes it own link to the base.		without contacting the base.

When you reset a handset (or if you purchase a new one), that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it.

25

Image 27

Contents If You Contact Uniden’s Phone Number EZAI2997 Series Users GuideWhats in the box? You might also findWhats in the manual? Important Safety PrecautionsCharge the Battery Installing Your PhoneIf... Try Connect the Telephone CordTest the connection Make a quick test call. Press Talk again to hang upGetting to Know Your Phone Base Keys and How They WorkFront view Parts of the Handset Side View Back ViewKey name What it does Key name Handset keys and how they workIcon What it means Reading the handset displayPerform these Basic actions Using the MenusManual once they Know how toEntering Text on Your Phone Ans. Setup MenuWith the earpiece Using Your PhoneMuting the ringer Changing the VolumeUsing the Redial List When On the base On a handsetCaller ID menu options Using Caller ID and Call WaitingUsing Call Waiting Dialing from the Caller ID listEach handset can store up to 70 entries in its phonebook Using Seven-Digit DialingUsing the Phonebook Phonebook menu optionsPhonebook entry options Using an Optional HeadsetChain Dialing Finding a Lost HandsetExpanding Your Phone Using Multi-Handset FeaturesUsing Conference Calling Using Privacy ModeFollow these steps Using Call TransferUsing the Intercom You can transfer an outside call to any other handsetUsing the Audio Boost Using Special FeaturesUsing Do Not Disturb Adjusting the Base Visual RingerResetting the voice message indicator Using Voice Message NotificationDelete your greeting Using the Answering SystemSetting Up Your Answering System Recording your outgoing messageAns. Setup menu options Accessing your answering system from a handsetGetting Your Messages How to operate your answering system Screening Your CallsFrom the base From a handset start remote Operation first With the phone in standby, open the menu from any handset Using the System While Youre Away from HomeProgramming a security code Dialing in to your systemIf… Try… Solving ProblemsWeak or Hard To Hear Audio Adjust the audio toneDo you have a T-Coil hearing aid? Installing a telephone line filter or DSL filterHere are some hints for when the static is Noise or Static onO The LineResetting and Registering Handsets Changing from Tone to Pulse DialingDo you have the base the handset is registered to? Yes Handset Base Handling Liquid DamageRegistering a handset Does the handset fit in the base cradle? YesTerms Used In This Guide Important InformationCompliance information FCC Part 15 information One-year Limited Warranty