Uniden EZAI2997 Series, EZX290 manual Installing Your Phone, Charge the Battery

Page 3

Installing Your Phone

Charge the Battery

) Unpack all handsets, battery packs, and battery covers. If any battery cover is already on the handset, press in on the notch and slide the cover down and off.

Black

Red

2)Line up the red and black wires on the battery pack with the label inside the handset.

) Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery pack is securely connected.

) Place the cover over the battery compartment and slide it up into place.

5)Connect the base AC adapter

to the

AC IN 7.8V

jack on the back of the

base. Route

the cord through the

molded wiring channel as shown.

) If you have accessory handsets, connect a charger AC adapter to each charger's AC IN 8V jack and set the plug into the notch as shown. (These adapters might already be connected.)

) Plug the other end of each adapter into a standard 120V AC power outlet.

Image 3

Contents If You Contact Uniden’s Phone Number EZAI2997 Series Users GuideWhats in the box? You might also findWhats in the manual? Important Safety PrecautionsCharge the Battery Installing Your PhoneIf... Try Connect the Telephone CordTest the connection Make a quick test call. Press Talk again to hang upGetting to Know Your Phone Base Keys and How They WorkFront view Parts of the Handset Side View Back ViewKey name What it does Key name Handset keys and how they workIcon What it means Reading the handset displayPerform these Basic actions Using the MenusManual once they Know how toEntering Text on Your Phone Ans. Setup MenuWith the earpiece Using Your PhoneMuting the ringer Changing the VolumeUsing the Redial List When On the base On a handsetCaller ID menu options Using Caller ID and Call WaitingUsing Call Waiting Dialing from the Caller ID listEach handset can store up to 70 entries in its phonebook Using Seven-Digit DialingUsing the Phonebook Phonebook menu optionsPhonebook entry options Using an Optional HeadsetChain Dialing Finding a Lost HandsetExpanding Your Phone Using Multi-Handset FeaturesUsing Conference Calling Using Privacy ModeFollow these steps Using Call TransferUsing the Intercom You can transfer an outside call to any other handsetUsing the Audio Boost Using Special FeaturesUsing Do Not Disturb Adjusting the Base Visual RingerResetting the voice message indicator Using Voice Message NotificationDelete your greeting Using the Answering SystemSetting Up Your Answering System Recording your outgoing messageAns. Setup menu options Accessing your answering system from a handsetGetting Your Messages How to operate your answering system Screening Your CallsFrom the base From a handset start remote Operation first With the phone in standby, open the menu from any handset Using the System While Youre Away from HomeProgramming a security code Dialing in to your systemIf… Try… Solving ProblemsWeak or Hard To Hear Audio Adjust the audio toneDo you have a T-Coil hearing aid? Installing a telephone line filter or DSL filterHere are some hints for when the static is Noise or Static onO The LineResetting and Registering Handsets Changing from Tone to Pulse DialingDo you have the base the handset is registered to? Yes Handset Base Handling Liquid DamageRegistering a handset Does the handset fit in the base cradle? YesTerms Used In This Guide Important InformationCompliance information FCC Part 15 information One-year Limited Warranty