Register Handsets to the Main Base before Using! (XSA1255+1 only)
Whichever handset you choose to charge in the main base will automatically register to the main base.
The second handset (charging in the extra charging cradle) MUST also be registered to the main base before use. Follow the steps below to register the second handset.
1)Be sure both handsets are fully charged.
2)Remove the handset from the charging cradle, and place it in the main base. The charge/in use LED light on the main base will begin to flash, indicating that the registration is taking place.
3)Wait for at least 5 seconds, then remove the handset from the main base.
4)Press the talk/flash key on one handset. If TALK appears on the display, the handset is registered, press the end key. Then, try with the second handset. If each handset displays TALK , a new security code is set. Otherwise, return to step 1 and try again.
5)Once both handsets are registered, it doesn’t matter which handset is placed in the main base or the charger.
!When you charge the handsets, Caller ID summary screen and the name of the
handset, Handset No.1
appears. If Handset No.2 appears, you are
charging the handset No.2.
Handset No.1
!The charging cradle can be used to charge either handset.
GETTING STARTED
[12]