Uniden XSA1255+1 owner manual Liquid Damage, Wipe off the liquid, and use as normal

Page 58

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

	Case		Action
	If the handset or base is exposed to	Wipe off the liquid, and use as normal.
	moisture or liquid, but it only affects
	the exterior plastic housing.

	If moisture or liquid has entered the	Handset:
	plastic- housing (i. e. liquid can be	1)	Remove the battery cover and leave it off for ventilation.
	heard in the phone or liquid has	1)	Remove the battery cover and leave it off for ventilation.
	heard in the phone or liquid has	2)	Remove the battery pack by disconnecting.
	entered the handset battery	2)	Remove the battery pack by disconnecting.
	entered the handset battery	3)	Leave the battery cover off and the battery pack disconnected for at least 3 days.
	compartment or vent openings on	3)
	the base).	4)	Once the handset is completely dry, reconnect the battery pack and he battery cover.
	the base).	5) Recharge the handset's battery pack for 20 hours before using again.

Base:

1)Disconnect the AC adaptor from the base unit, cutting off electrical power.

2)Disconnect the telephone cord from the base unit.

3)Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please visit our website for further information (www.uniden.com.au or www.uniden.co.nz).

[57]

Image 58

Contents XSA1255/XSA1255+1 Contents Welcome Features ItadControls & Functions XSA1255 Handset XSA1255+1 HandsetMain Base Extra Charging Cradle XSA1255+1 onlyTerms Used in this Manual Choose the best location Installing the PhoneDo the following steps Install the Rechargeable Battery Packs into the Handsets Getting Started Mount the Main Base on a Wall Standard wall plate mountingTo attach the beltclip Installing the BeltclipDirect wall mounting To remove the beltclipHeadset Installation Charging the handset No.2 When to Re-register Handsets XSA1255+1 only Activating AutoTalk Activating Caller ID on Call WaitingSetting Name Tag POP ID Name TagSetting Insert GettingSelecting the Ring Tone and Volume Handset only Receiving a call Making and Receiving CallsMaking a call Hanging upTo transfer a call Transferring a Call XSA1255+1 onlyRedialing the Last Dialed Number To receive a transfer callTemporarily Mute Ringer Adjusting the Earpiece VolumeTraveling Out-of-Range Selecting a Different Channel Using Call WaitingFind Handsets RocketDial Storing the RocketDialUsing the Speed Dial Memory Storing Names and Numbers in Speed Dial MemoryUsing the Speed Dial Memory Page Storing Caller ID Messages in Speed Dial Memory Vol/ keyMaking Calls from Speed Dial Memory Easy DialCaller ID Features Caller ID and Cidcw Caller ID on Call WaitingViewing the Caller ID Message List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Making a Call from the Caller ID List Caller ID on Call Waiting CidcwIntegrated Telephone Answering Device FeaturesTurning the Answering System On/Off Setting Up Your Answering System Answering System SettingsSetting the Time Setting a Personal Security Code PIN Setting the Ring Time Announce only feature Selecting the Message Record TimeSetting the Message Alert Tone Setting Your Outgoing Message Greeting Preset messageRecording a personal outgoing message Greeting Choosing between the two outgoing messagesAdjusting the Speaker Volume Level Setting the Base Ringer VolumeTemporarily Mute the Base Ringer and Call Screen Using Your Answering System Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memo Remote access away from home Remote OperationCommand Function # then Repeat a Message Turn on the Answering System Remotely Remote access with the handset XSA1255 only For XSA1255 Changing the Digital Security CodeFor XSA1255+1 Battery replacement and handling Power Failure Cleaning the battery charging contacts General Information Operating temperatureBattery Information AC Adapter InformationTroubleshooting AdditionalSymptomSuggestion Additional Information Liquid Damage Wipe off the liquid, and use as normalIndex G, H, I, J, K, LMemo Remote Operation Card / Memory List Remote Operation CardRemote Operation Card / Memory List One Year Limited Warranty Uniden XSA1255/XSA1255+1 Corldess PhoneThank YOU for Buying a Uniden Product