Uniden XS1210 owner manual Install the rechargeable battery pack into the handset

Page 4

B. Install the rechargeable battery pack into the handset

The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit.

NOTE: If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer.

1. Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove.

2. Plug the battery pack connector (red & black wires) into

the jack inside the battery compartment (the connector notches fit into the grooves of the jack only one way). Match the wire colours to the polarity label in the battery compartment, connect the battery and listen for a click

to insure connection.

3. Before replacing the battery cover, pull on the battery wires slightly. If the connection is secure, the jack will

stay in place. Then place the battery case cover back on the handset by sliding it upwards until it clicks into place.

NOTE: For optimum performance, use only the Uniden battery (BT- 905) supplied with your phone.

C. Connect the base unit and charge the handset

1.

Connect the AC adaptor to the DC IN 9V jack

R oute the cor d.

2.

and a standard 240V AC wall outlet.

 

Set the base unit on a desk or tabletop, and

 

 

place the handset in the base unit with the

 

3.

keypad facing forward.

 

Make sure the charge/in use LED illuminates.

 

 

If the LED does not illuminate, check to see that the

 

 

AC adaptor is plugged in and the handset makes

 

 

good contact with the base charging contacts.

 

NOTICE: Do not place the power cord where it creates

a trip hazard or where it could become chafed and create a fire or electrical hazard.

NOTE: • Use only the supplied AAD-210 AC adaptor.

Do not use any other AC adaptor.

• Connect the AC adaptor to a continuous power supply.

• Place the base unit close to the AC outlet to avoid long extension cords.

4. Charge your handset at least 15-20 hours before plugging the phone line.

When fully charged the battery will provide up to 7hrs talk time and 14 days standby time.

[3]

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Owners Manual Introduction FeaturesControls and Functions Installing the Phone Included with Your PhoneChoose the best location TerminologyInstall the rechargeable battery pack into the handset Connect the base unit and charge the handsetStandard wall plate mounting Mount the base unit on a wallDirect wall mounting Making and Receiving Calls Adjusting the Ringer and Earpiece VolumeFlash and Call Waiting Using the Speed Dial Memory and RocketDial Cleaning the battery charging contactsLow Battery Alert Find HandsetDialing a Speed Dial Number Chain DialingMaking Calls With Rocketdial/call wait Erasing a Stored Number from MemoryChanging the Digital Security Code Troubleshooting Symptom SuggestionLiquid Damage Case ActionUniden XS1210 Cordless Phone Limited One Year Warranty WarrantyWarranty only available in original country of purchase Uniden Australia Pty Limited/Uniden New Zealand Limited

XS1210 specifications

The Uniden XS1210 is a sophisticated two-way radio system that stands out in the world of communications gear. Designed for both professional and recreational use, it combines advanced technology with user-friendly features to provide a reliable communication solution.

One of its main features is its extended range capability. The XS1210 utilizes UHF frequencies, which allow for clearer transmissions over longer distances compared to VHF radios. This makes it particularly useful for outdoor activities such as hiking, camping, and events where traditional cell phone coverage may be unreliable. With a robust output power, users can expect to communicate effectively even in challenging environments.

The Uniden XS1210 is equipped with advanced Digital Signal Processing (DSP) technology. This enhancement minimizes interference and improves sound quality, ensuring that messages are transmitted clearly. The DSP also helps to filter out background noise, making conversations more understandable in crowded areas or noisy settings.

Battery life is another significant characteristic of the XS1210. It is designed to be energy-efficient, allowing users to stay connected for extended periods without the need for frequent recharging. This feature is particularly advantageous for users engaging in long outdoor excursions or during prolonged events.

The radio also includes various channels and privacy options. Users can choose from multiple channels to minimize interference with other radio users, while the built-in privacy codes provide an additional layer of security, ensuring that conversations remain confidential.

Portability is a key design element of the XS1210. Its compact and lightweight form makes it easy to carry, whether clipped to a belt or packed in a bag. The unit is also rugged and durable, with weather-resistant properties that can withstand the rigors of different environments, making it suitable for both indoor and outdoor use.

Ease of use is further enhanced by the XS1210’s intuitive interface. It features an easy-to-read LCD display and a simple button layout, allowing for quick access to channels and settings. Users can effortlessly adjust the volume, change channels, or activate the emergency alert function when needed.

In conclusion, the Uniden XS1210 is a versatile two-way radio system that excels in range, sound clarity, battery life, and durability. Its thoughtful design and features make it an excellent choice for anyone in need of reliable communication in both professional and leisure activities. Whether navigating the great outdoors or coordinating events, the XS1210 delivers performance and peace of mind.
Top Page Image Contents