8 Installation
WARNING
Keep the SPECIFIED CLEARANCE around the ancillary cabinets.
Inadequate space around the UPS makes it difficult to perform maintenance/inspections, lead to insufficient ventilation, and/or will cause malfunctions.
See Figure 10.1 - UPS Clearance
DO NOT tilt the ancillary cabinet more than 10° from upright position.
Tilting the UPS more than 10° may cause crushing, trapping or other personal injuries.
Install anchor bolts to secure the ancillary cabinet to the installation floor.
The UPS may fall during an earthquake if the anchor bolts are not installed and secured.
DO NOT transport, move, store, or place the ancillary cabinet on its side.
Forces due to heavy components inside may damage the UPS.
DO NOT allow the UPS to suffer shock or impact when unpacking.
Tools used to remove packaging materials may cause damage to the
UPS.
DO NOT push or pull on the sides of the packaging, or the UPS to move it. Always use a crane, forklift, or pallet jack for transporting and positioning the UPS.
Pushing/pulling on the sides of the unit to move it may result in damage to the UPS. See Figure 4.1 Exterior Handling label.
4300 Series Ancillary Cabinets Installation and Operation Manual | 17 |
