2)The voltage of the input power source must be within the rated input voltage range. The input frequency range must be within the rated input frequency range.
3)The ancillary cabinet should not be used with a load that has a rated input that is greater than the rated output of the UPS.
4)If using the ancillary cabinet to provide power to motors that require high starting current or with motors that require a long starting time, call Toshiba support for guidance in over sizing the UPS for
5)DO NOT insert metal objects or combustible materials in the ventilation slots of the ancillary cabinet.
6)DO NOT place, hang, or paste any objects on the exterior surfaces of the ancillary cabinet.
7)DO NOT attempt to disassemble, modify, or repair the ancillary cabinet. Call your Toshiba sales representative for repair information.
8)Turn the power on only after installing ALL of the covers.
9)DO NOT remove any covers of the ancillary cabinet when power is on.
10)If the ancillary cabinet should emit smoke or an unusual odor or sound, turn the power off immediately.
11)Additional warnings and notifications shall be posted at the equipment installation location as deemed required by Qualified Personnel.
4300 Series Ancillary Cabinets Installation and Operation Manual | 15 |
