Uniden XS610 manual Important Safety Instructions

Page 7

IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, these basic safety precautions should always be followed to reduced the risk of fire, electrical shock, and injury to persons:

1.Read and understand all instructions.

2.Follow all warnings and instructions marked on the product.

3.Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners.

4.Do not use this product near water; for example, near a bath tub, shower, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.

5.Do not place this product on an unstable stand, or table. The telephone may fall, causing serious damage to the unit.

6.Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect the product from overheating, these openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.

7.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.

8.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be damaged by persons walking on it.

9.Do not overload wall outlets and extension cords, as this can result in the risk of fire or electrical shock.

10.Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock. Never spill liquid of any kind on the product.

11.To reduce the risk of electric shock, do not disassemble this product. Take it to qualified service personnel when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks.

Incorrect reassembly can cause electric shock when the appliance is subsequently used.

12.Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

A.When the power supply cord is damaged or frayed.

B.If Liquid has been spilled into the product.

C.If the product has been exposed to rain or water.

D.If the product does not operate normally when following the operating instructions.(Adjust only those controls that are covered by the

PRECAUTIONS

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents XS610 Controls and Functions Contents Mounting Screws Memory Stickers Included in Your PackageRange Telephone Line ProblemsPrecautions PrecautionsRechargeable Nickel-Cadmium Battery Warning Important Safety Instructions More Than One Cordless Telephone Radio InterferenceUltraClear Plus innovative technology, together with 10 AUS FeaturesIntroduction WelcomeSelecting a Location InstallingInstallation Connecting the Telephone CordCharging the Handset Charging the Battery PackLow Battery Indicator Cleaning the Battery ContactsWall Installation Desk or Tabletop InstallationMounting on a Standard Wall Plate Mounting Directly on a Wall Raising the Antenna Setting UP Your PhoneRinger Tone and Volume Setting the Handset Earpiece VolumeMaking and Receiving Calls UsingEntering a Pause in Memory Dialling Storing a Number in MemoryDialling a Stored Number Replacing a Stored Number Using the Flash ButtonChain Dialling Erasing a Stored NumberSelecting a Different Channel Using the PAGE/FIND FeatureTravelling OUT of Range Trouble Shooting That they are pushed in firmly until they click Second to reset the systemMain battery compartment on the handset Charging contacts may need to be cleaned Refer toGeneral SpecificationsBase Unit Warranty WarrantyToll Free 1300 366 Toll Free 0800 4 Uniden 864 Thank YOU for Purchasing a Uniden Phone
Top Page Image Contents