STORING A PHONE NUMBER IN MEMORY
NOTE
Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby.
1)Remove the handset from the base.
2)Press and hold mem for two seconds. A short tone will sound and the following screen appears.
1>
2
Memory Store
You may also press mem to exit a memory menu at any time.
HINT
The character menu consists of letters, symbols, and numbers.
3)Use the : and ; keys or number keypad to choose the memory location where you would like to enter a number.
4) Press select. The following screen appears, |
| |
Store Name | ||
and a cursor flashes indicating that the | ||
❚ | ||
display is ready for the name to be entered. |
| |
|
|
5)Use the : and ;keys to scroll through the character menu. Use the
<and >keys to move the cursor to the desired location, and enter the name.
6)If you make a mistake, press delete to erase the character you just entered. Or press and hold delete to erase the entire line.
7) Press select. The following screen |
| |
Store Number | ||
appears, and a cursor flashes indicating | ||
❚ | ||
that the display is ready for the number. |
| |
|
|
8) Enter the phone number with the handset keypad.
NOTE
The pause button counts as one digit. Pressing pause more than once increases the length of pause between numbers.
When entering numbers, press pause to enter a pause in the dialing sequence. The display shows a P. The pause feature is useful for long distance
NOTE calling, credit card dialing, or sequences requiring pause between digits.
9)Press select. The handset beeps and displays a confirmation screen. For example, if you store a name and number
into memory location number one, the display shows Memory 1 Stored.
Memory 1 Stored
10)Press mem or return the handset to the charging cradle to exit store mode. Or, wait 20 seconds for the phone to return to standby.
16