Uniden EXI7960 manual Standard Wall Plate Mounting

Page 9

DO NOT use an outlet controlled by a wall switch.

Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery (refer to “Charging the Battery Pack,” page 12).

2)Flip the handset retainer over so the tab is facing up.

3)Slide the handset retainer back onto the base.

▼Standard Wall Plate Mounting

This phone can be mounted on any standard telephone wall plate.

1) Plug the AC adapter into the DC input jack on the back of the base, then place the AC adapter cord inside the left molded channel cord holder.

2) Plug a short telephone cord into the TEL LINE jack on the base, then place the telephone cord inside the right molded channel cord holder.

6

Image 9

Contents MHz Cordless Phone with Caller ID Functionsand Controls At Uniden, we’ll take care of you Contents Welcome FeaturesIncluded in Your Package TIPDESK/TABLETOP Installation InstallingSetting the Handset Retainer for Wall Mounting Wall InstallationStandard Wall Plate Mounting Page Direct Wall Mounting Page Page Installing the Handset Battery Pack Cleaning the Battery Contacts Charging the Battery PackInitial battery charging Low battery indicatorSetting the PULSE/TONE Switch Handset Ringer Tone and VolumeHandset Earpiece Volume Automatic Digital Code Security Using the page FeatureFlash and Call Waiting Making and Receiving CallsStoring a Phone Number in Memory HintRemove the handset from the base Editing a Phone Number in MemoryErasing a Number from Memory Chain Dialing Using Memory DialingSetting Up Caller ID Options Using Caller IDScreening Your Calls Using Cidcw Caller ID on Call WaitingCalling a Caller ID Number Reviewing Caller ID NumbersDeleting a Caller ID Number Storing a Caller ID Number Into a Memory LocationDeleting All Caller ID Numbers Using Redial Using the Tone FeatureSelecting a Different Channel Traveling OUT-OF-RANGE Quick Reference Chart TroubleshootingProblem Suggestion N E R a L S EN D S E T Thank