Handset doesn’t ring or, Not work, Turned on

Uniden EXA 7950 manual Handset doesn’t ring or, Not work, Turned on, Messages are incomplete

Page 31

PROBLEM		SUGGESTION
The handset doesn’t ring or	•	The Nickel-Cadmium battery pack
receive a page.		may be weak. Charge the battery
		on the base unit for 15-20 hours.
	•	The handset may be too far away
		from the base unit.
	•	Place the base unit away from
		appliances or metal objects.
	•	Place the handset back on the
		charging cradle for a few seconds.
		The status LED will blink
		indicating that the phone has
		been reset.

The answering system does	•	Make sure the base unit is plugged in.
not work.	•	Make sure the answering system is
		turned on.
	•	Press RESET after an AC line spike.

The answering system does	•	Set the REC TIME switch to either
not answer calls.		the one minute or four
		minute option.
	•	The memory may be full. Delete
		some or all of the saved messages.

Messages are incomplete.	•	The incoming messages may be too
		long. Remind callers to leave a
		brief message.
	•	The memory may be full. Delete
		some or all of the saved messages.	T R

After a power failure, the	•	Record your personal outgoing
outgoing message is deleted.		message again. The default	O
		messages should remain.	U
			B L E
No sound on the base unit	•	Adjust the speaker volume on the	B L E
speaker during call		base unit.	S
monitoring or			H
monitoring or			O O
message playback.			O O
			T I N G
			T I N G

Image 31

Contents

Page N T E N T S Installing and Adjusting Your PhoneWelcome FeaturesIncluded in Your Package Rechargeable BatteryHandset Base Plug the AC adapter into a standard 120 VAC wall outlet DESK/TABLETOP InstallationCharge the battery refer to Charging the Battery Pack, Wrap the AC adapter cord around the strain relief notchStandard wall plate mounting Wall InstallationVAC wall outlet Install I N G a N D a D J U S T I N G Direct wall mounting VAC wall outlet Charging the Battery Pack Installing the Handset Battery PackInitial battery charging Low battery indicator Cleaning the Battery ContactsFor 60 seconds Handset earpiece volume Setting the PULSE/TONE SwitchAdjusting the Ringer Controls Handset ringer tone and ringer volumeAutomatic Digital Code Security Flash and Call Waiting Making and Receiving CallsRemove the handset from the base Using the memory location featuresStoring a Phone Number in Memory Dialing a Stored NumberOne-touch priority dialing Dial the party or service main numberChain Dialing Erasing a Stored Number from MemoryTraveling OUT-OF-RANGE Using the SpeakerphoneRedial ToneIntegrated Answering Device UpsettingTurning the Answering System ON/OFF Setting the ClockTo record your own greeting, follow the steps below Preset messageRecording your personal greeting Following message is prerecordedSelecting the Message Record Time Announce only featureWhen the system is on standby Four minute option move the REC Time switch toSelecting a PIN Code Calling Party Control FeatureUsing the Reset Button Setting the Toll Saver SwitchYou can set the switch to answer Repeating a Message Playing Your MessagesPress play/stop. The system E U S E Skipping a MessageVoice Memo Deleting a MessagePress play/stop to review your messages Recording a Conversation Remote Access Away from Home To stop recording, press play stop or voice memo again Function Press Remote Room Monitor Quick Reference Chart Turned on After a power failure, Record your personal outgoingHandset doesn’t ring or Not workIt cannot, you may have to use Another phone to accessYour messages N D S E T Talk mode Hours Standby mode DaysN E R a L S EAt Uniden, we’ll take care of you Functionsand Controls Thankfor

Uniden EXA 7950 manual Handset doesn’t ring or, Not work, Turned on, Messages are incomplete

The handset doesn’t ring or

not work.

turned on.

Messages are incomplete.

After a power failure, the

Record your personal outgoing

T I N G