![](/images/new-backgrounds/1141877/14187717x1.webp)
5)Put the AC adapter cord inside the molded wiring channel, then wrap the AC adapter cord around the strain relief notch. Plug the AC adapter into a standard
120 VAC wall outlet.
6)Plug one end of the telephone cord into the TEL LINE jack on the back of the base, then plug the other end into a standard telephone jack.
7)Line up the mounting slots on the base with the mounting screws on the wall, then push in and down until the phone is firmly seated.
8)On the base unit, pull the handset retainer out of the slot and rotate it clockwise 180 degrees.
I N S T A L L I N G A N D A D J U S T I N G
7