Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1)Snap the wall mount adapter into the notches on the base.
2)Plug the AC adapter into the DC IN 9V jack. Route the AC adapter cord inside the molded wiring channel as shown.
3)Plug the AC adapter into a standard 120V AC wall outlet.
4)Plug the telephone line cord into the TEL LINE jack. Route the cord inside the molded wiring channel
as shown.
5)Plug the telephone line cord into the telephone outlet.
6)Raise the antenna to a vertical position.
7)Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.
When the base is wall mounted, place the handset with the keypad facing up.
Do not use an outlet controlled by a wall switch.
G E T T I N G S T A R T E D
G E T T I N G S TA R T E D [ 17 ]