•The tone feature only applies when the dial mode is set to pulse.
•This special number can be stored in a memory location. This is referred to as Chain Dialing. (See page 36.)
Mute Microphone
You can temporarily turn Off the microphone so that the person you are talking with cannot hear you. During a telephone call press and hold menu/mute to turn Off the microphone, and “Mute” appears on the display. Press menu/mute again to cancel muting.
•If you press end to cancel muting, the call is disconnected and the
phone will return to standby mode.
•If you press delete/transfer or talk/call wait while muting, the muting is canceled.
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can
bank account number after you have called your bank.
Initially make your call with the pulse dialing mode. Once your call connects, press */tone. Enter the desired number. These digits will be sent as tone dialing. Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within 30 seconds.
[ 26 ] B A S I C S