Uniden EXS 2060 manual Standard wall plate mounting

Page 10

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1

2 - 7

1 Snap the wall mount adapter into the notches on the base.

2 Plug the telephone line cord to the

TEL LINE jack and the AC adapter to the DC IN 9V jack.

3 Plug the telephone line cord into the telephone outlet.

4 Wrap the AC adapter cord inside the molded wiring channel. Then wrap the cord around the strain relief notch.

5 Plug the AC adapter into a standard

120V AC wall outlet.

6 Raise the antenna to a vertical position.

7 Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.

8

Image 10

Contents Page Introduction to Your NEW Phone 28 29 Getting Started Telephone featuresCaller ID features BasicsAbout the digital security code 5 to10 to11 Base unitUniden Parts Department Choose the best location Connect the base unit Pulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemStandard wall plate mounting Direct wall plate mounting Preparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsExample Dialing from standbyOther Operations Talk 017 Dialing from talk modeTalk High 1003Any key answer when ringing AutoTalk when ringingCall Waiting Ringer on/off switch Ringer tone and volumeEarpiece volume Redial from standby Redial2 Redial3Redial from talk mode HighStore Name Memory StoreEdit Memory07 Delete Memory07 Go Back Store Number Memory07 StoredMemory dialing from standby Display a Programmed NumberTalk Talk High Memory dialing from talk modeTalk 035 Store Number Memory01 Stored Memory Store isEdit Memory02 Memory Store 01 Uniden Corp 02 John DOEEdit Memory02 Delete Memory02 Go Back Down to Delete Memory Delete Memory02To locate the handset PagingWhen speaking on the handset When phone is ringingSetting Caller ID options To change your Caller ID options11 1230PM 813-8 3300New Total02 17 1230PM Uniden CorpDeleting a Caller ID message When the pointer is at YesWhen the pointer is at No Delete Message? YesDelete All? Yes Deleting all Caller ID name/numbersTotal00 Calling a party from the Caller ID list Long Distance call and Area Code settingDial edit Storing Caller ID messages in Memory dialing Long Distance call and Area Code settingSelect Location 01 Uniden Corp 02 Jone DOE When a new incoming call arrives Additionalinformation Beltclip installation To attach the beltclip To remove the beltclipWhen slightly dirty Battery replacement and handlingPower Failure When very dirtyTroubleshooting Your NEW Phone Symptom SuggestionAt Uniden, we’ll take care of you Please do not Return this Product to the Place of PurchaseJ, K, L V, W, X, Y, ZMemo