Using the Answering Machine Interface
Base operation
When the phone is in standby, press [clock/menu] to scroll through the answering machine setup options. Each menu option has voice prompt instructions; you can press [clock/menu] at any time during the instructions. After the last option, call screening, the answering machine returns to standby. You can exit the answering machine at any time by pressing []. If you receive a call while you are in the setup menus, the operation is cancelled.
|
| Security | Ring | Record | Message |
| Call | Return to |
Standby | Time | code | Time | Time | alert | Language | screening | standby |
clock/menu | clock/menu | clock/menu | clock/menu | clock/menu | clock/menu | clock/menu | clock/menu | (tone sounds) |
Handset menu
When the phone is in standby, press the MENU soft key and then scroll down and select ANSW. SETUP.
You can use your handset to operate your answering machine from anywhere in your home. When the phone is in standby, press the soft key on the handset to access the answering machine. REMOTE ANSWERINGMACHINE OPERATION appears on the handset display, and the answering machine announces the time and the number of new and old messages. Keep the following things in mind when you use your handset to access your answering ma- chine:
•You can enter a command at any time during the announcements.
•After the first announcement, you have 30 seconds to enter your first command before the answering ma- chine returns to standby.
•After the initial command, you have 2 seconds to enter commands before the answering machine returns to standby.
•If you receive a call, the remote operation is canceled.
49