Uniden TRU241 owner manual Entering a Pause in Memory Dialing, Storing Mixed Tone/Pulse Numbers

Entering a Pause in Memory Dialing

If you would like to use a phone number stored in memory to access voice mail, for example, you can store a pause in the phone number sequence.

To use this function, follow steps 1 and 2 in “Storing a Number in Memory”, then press the pause button on the handset to place a pause in the phone number sequence.

Follow the remaining steps in the “Storing a Number in Memory” section to complete the operation.

Storing Mixed Tone/Pulse Numbers

If your phone is set up for pulse dialing, you can store a mixed mode number (up to 20 digits) to easily access long distance services.

1.Remove the handset from the base and press memory. The talk/battery low LED flashes.

2.Enter the number to be dialed in pulse mode.

3.Press the tone button on the handset. The tone button counts as one digit and enters a pause.

4.Enter the number(s) to be dialed in tone mode.

5.Press memory and a number (0-9) on the keypad for the memory location you wish to use. You hear a long beep and the talk/battery low LED goes out.

Dialing a Stored Number

To dial a phone number stored in memory, press talk, then press memory and the memory location (0-9). Your phone will dial the stored number.

•Remember, the phone number you wish to store cannot have more than 20 digits, including the pause. (The pause button counts as one digit.)

•If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will not dial.

U S I N G Y O U R P H O N E

U S I N G Y O U R P H O N E [ 11 ]