Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. Interference can come from appliances or other phones in your home. This function works only when the phone is in use.
The channel button on the handset allows you to choose between 30 factory set channels. During the course of a conversation, if you hear static or noise which makes it difficult to hear, press channel. The talk/battery low LED flashes, indicating the phone is changing to another channel.
Using the Flash Button
Use the flash button for accessing services such as call waiting.
If you receive a call during your conversation, press the flash button on the handset. Press the flash button again to return to the previous call.
Using the Page/Find Feature
The Page/Find feature sends a signal from the base to the handset causing it to beep. This is useful for locating the handset when it is away from the base. To use this feature, press page/find on the base. The handset beeps for 5 seconds. (Press and hold the page/find button for more than 2 seconds, to get a continuous beep for a minute.)
If you hold down page/find more than a minute, the handset beeps until you release page/find. On the handset press talk to end the page. Press talk again if you do not wish to make a call.
Traveling Out of Range
When you begin to move too far from the base, you will first hear a clicking sound. As you travel further out of range, the voice transmission will begin to break up. If you pass the range limits of the base, your call will terminate.
U S I N G
The paging feature does not work when the phone is in use.
Y O U R P H O N E | [ 13 ] |