Chain Dialing, Erasing a Stored Number, Mute

Chain Dialing

After dialing a number you may be requested to enter a special access code, for example, when performing a banking transaction.

1.Store the access code into one of the memory locations (0-9).

2.Dial the main number.

3.Press memory and the memory location of the access code at the appropriate time.

Erasing a Stored Number

1.Remove the handset from the base.

2.Press memory twice.

3.Press the memory location number (0-9) you want to erase. You hear a long beep confirming that you have erased the number.

Mute

You can temporarily turn off the handset microphone so that the person you are talking with cannot hear you. During a telephone call, press mute to turn off the microphone. To cancel mute, press

mute or talk.

Replacing a Stored Number

Remember, your TRU 241 phone has 10 memory locations represented by the numbers 0-9 on the keypad. If you store a phone number in one of these locations, then attempt to store a different number in the same location later, the new number will replace the previous one.

[ 12 ]

U S I N G Y O U R P H O N E