Uniden PS-0033 manual Remember to use appropriate anchors for the wall material

Page 10

3.Align the stand with the notches on the

charger.

4. Slide the stand onto the notches until it clicks into place.

5. Insert two #10 screws into the wall, 30 mm apart. (For best results, use a level to ensure the screws are even.)

Remember to use appropriate anchors for the wall material.

6.Keeping the AC

adapter cord out of the way, place the charger over the screw heads and slide it down into place.

Switching back to the desk stand

If you want to switch back to using the charger on a desktop:

1.Remove the stand.

2.Rotate the stand so that the locking tabs that say Desk are facing the charger with the arrows pointing up.

3.Align the stand with the notches on the charger.

4.Slide the stand onto the notches until it clicks into place.

10

Image 10

Contents Care Line immediately. Never use damaged products If You DRX402 Accessory Handset Multirangetm Charger Users GuideWhats in the box? Phone NumberWhats in the manual? Important Safety InstructionsUsing the Multirangetm RegisteringInstall the Battery Setting Up Your HandsetConnect the Charger Registering the handset is a separate process from Registering the HandsetTry Compatible BasesAfter about 30 seconds, the handset display Using the HandsetAttaching the Belt Clip Test the connectionUsing the Multirangetm Charger How It WorksRegistering the Multirangetm charger Placing the Multirangetm charger Picking the best spotTesting the location Wall Mounting the Multirangetm chargerSwitching back to the desk stand Remember to use appropriate anchors for the wall materialBattery Information SpecificationsImportant Information Rechargeable Nickel-Metal-Hydride Battery Warning FCC Part 15 information Compliance InformationRF exposure information Industry Canada I.C. Notice Terminal equipment Radio equipmentOne-year Limited Warranty Warrantor Uniden America Corporation UnidenUniden America Service Amon Carter Blvd Fort Worth, TX S. registered mark