Uniden PS-0033 manual Setting Up Your Handset, Install the Battery, Connect the Charger

Page 3

Setting Up Your Handset

1. Unpack the handset, battery pack, and

battery cover. If the battery cover is already on the handset, press in on the notch and slide the cover down and off.

2.Line up the battery pack connector with the jack inside

the handset. (The battery

connector only fits one way.)

3. Push the battery pack connector in until it clicks into place. Tug gently on the wires

to make sure the battery pack is securely connected.

4. Place

the cover over the battery compartment and slide it up into place.

1. Connect the AC adapter to the charger's AC IN 6.5V jack and route the cord as shown. (This adapter might already be connected.)

2.Plug the other end of the adapter into a standard 120V AC power outlet.

Image 3

Contents Phone Number DRX402 Accessory Handset Multirangetm Charger Users GuideWhats in the box? Care Line immediately. Never use damaged products If YouRegistering Important Safety InstructionsUsing the Multirangetm Whats in the manual?Setting Up Your Handset Install the BatteryConnect the Charger Compatible Bases Registering the HandsetTry Registering the handset is a separate process fromTest the connection Using the HandsetAttaching the Belt Clip After about 30 seconds, the handset displayHow It Works Using the Multirangetm ChargerRegistering the Multirangetm charger Picking the best spot Placing the Multirangetm chargerWall Mounting the Multirangetm charger Testing the locationRemember to use appropriate anchors for the wall material Switching back to the desk standSpecifications Battery InformationImportant Information Rechargeable Nickel-Metal-Hydride Battery Warning Compliance Information FCC Part 15 informationRF exposure information Terminal equipment Radio equipment Industry Canada I.C. NoticeWarrantor Uniden America Corporation Uniden One-year Limited WarrantyS. registered mark Uniden America Service Amon Carter Blvd Fort Worth, TX