Hardware Installation
General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed.
Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touching your computer’s case for a few seconds. Avoid any contact with internal parts and handle cards only by their external edges.
1.Turn OFF the power to your computer.
2.Unplug the power cord and remove your computer's cover.
3.Remove the slot bracket from an available PCI slot.
4.Carefully align the card to the selected PCI slot push the board down firmly, but gently, until it is well seated.
5.Replace the slot bracket's holding screw to secure the card.
6.Replace the computer cover and reconnect the power cord.
Driver Installation
To ensure proper installation of this board, please follow these instructions
Windows98SE
1.Install the board, boot up the system, and insert the driver CD.
2.WhenWindowsbootsup,atthe AddNewHardware Wizard window, click Cancel four times.
4
