3.Click Start, then Run. Type in X:\setup.exe and click OK. (Change X: to match your
4.Click Next, Next, at the Warning box click OK, then click Finish to restart.
5.When the VIA ...Universal Host Controller is detected, click Next.
6.Choose Search for the best driver... and click Next.
7.Clear all check boxes, click Next, Next, Next.
NOTE: If prompted for Windows 98SE Installation CD, click OK. Insert this CD and click OK.
8.Click Finish.
9.When the VIA ...Universal Host Controller is detected, click Next.
10.Repeat steps 6, 7 and 8.
11.WhentheUSBEnhancedHostControllerisdetected, click Next.
12.Repeat step 6.
13.Clear all check boxes, click Next, Next, then Finish.
14.When the VIA OHCI IEEE 1394 Host Controller is detected, click Next.
15.Repeat steps 6 and 13 to complete the installation.
Windows ME
1.Install the board, boot up the system, and insert the driver CD.
2.WhenWindowsbootsup,atthe AddNewHardware Wizard window, click Cancel. Click No to decline restart.
5
