MODEL | DIRECTIONS: | |
| • Remove the battery compartment cover from the | |
| bottom of the main base. | |
| • Press and hold the Registration button located in the | |
ELT560 | battery compartment until the base LEDs start | |
blinking. | ||
| ||
| • On the handset, press and hold [#] until the display | |
| reads HANDSET REGISTERING and you hear a | |
| beep. | |
| • Disconnect the base AC adapter. | |
| • While holding the [find handset], reconnect the AC | |
TRU8860 | Adapter. | |
TRU8865 | • On the handset, press and hold [#] until the display | |
| reads HANDSET REGISTERING and you hear a | |
| beep. | |
| • Disconnect the base AC adapter. | |
| • While holding the [flash/find hs], reconnect the AC | |
TRU8866 | Adapter. | |
TRU8885 | • On the handset, press and hold [#] until the display | |
| reads HANDSET REGISTERING and you hear a | |
| beep. | |
| • Disconnect the base AC adapter. | |
| • While holding the [find hs/intercom], reconnect the | |
TRU8880 | AC Adapter. | |
• On the handset, press and hold [#] until the display | ||
| ||
| reads HANDSET REGISTERING and you hear a | |
| beep. |
2.When REGISTRATION COMPLETE. is displayed; the handset has been registered to the base. If REGISTRATION FAILED. appears, please try these steps again.
6