CHAIN-DIALING Memory Numbers

Notes:

. If you receive a call while you store a number in memory, press

TALK/HANGUP to answer the call.

After the call, begin again at Step 2 to store the number.

. For each number you store, write the person'sor company'sname next to the appropriate location number on the memory index card.

Use a pencil in case you later store a different number.

. To delete a number from memory, repeat all steps except Step 3 in "Storing a Number in Memory."

Dialing a Memory Number

Follow these steps to dial a number stored in memory.

1.Lift the handset from the cradle, or press TALK/HANGUP.

2.When you hear a dial tone, press P1, P2, or P3 for one-touch dialing, or press MEMOand then enter the memory-location code.

When you use special services, such as alternate long-distance or bank-by- phone, you can store the service's phone number in one memory loca- tion, your security code (if you have one) in another location, and any other numbers, such as the long-dis- tance number, in a third location. This

lets you easily dial a long sequence of numbers.

Note: To prevent unauthorized ac- cess to your account, we recommend that do not write down the memory lo- cation code for your security code on the memory index card.

To chain-dial memory numbers, follow these steps.

1.Press MEMOand the memory-loca-

tion code (or press P1, P2, or P3) for the service'smain number.

2.Wait for the computer tone after the service answers.

3.Press MEMOand the memory-loca- tion code (or press P1, P2, or P3) for your security code (if neces- sary).

4.Press MEMOand the memory-loca- tion code (or press P1, P2, or P3) for the remaining numbers.

Note: If you use pulse dialing, re- member that you need to set TONE/PULSEto TONE or press the key under P1 before you store num- bers you want to memory-dial after you reach the special service.