•Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after each telephone call.
•If you must replace the battery pack during a telephone call, complete the replacement within 30 seconds, and you can return to the original call.
Battery use time (per charge)
From fully charged
•Six hours continuous use
•Ten days when the handset is in the standby mode
When the battery charge becomes low
When the battery pack is very low and needs to be
charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in
use, “Low Battery“ flashes and none of the keys will operate.
If the phone is in use, “Low Battery“ flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.
The last number dialed in the redial memory is retained for up to 2 minutes while you replace the battery pack.
Cleaning the battery contacts
To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth or a pencil eraser about once a month.
Do not use any liquids or solvents.
[ 10 ] G E T T I N G S TA R T E D | contacts |
|