Uniden T R U 346 owner manual Chain Dialing, Memory dialing from talk mode

If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will not dial.

Memory dialing from talk mode

1 Press .

“Talk“ and the volume setting appear on the display.

If you set the ringer to off,

“ <Ringer Off>“ appears on the display.

2 press .

3 Enter a two-digit number (01 - 20) to select the memory location of the desired phone number.

The selected phone number is displayed. Then the number is dialed.

Chain Dialing

On certain occasions af ter dialing a number, you may be requested to enter an access code, such as your account number. You can enter this number into a memory location for later use by doing the following:

1Store the access code into one of the memory locations (01-20) following the steps on page 17.

2Dial the party or service main number.

3When you need to enter the special number, press followed by the memory location (01-20).

[ 22 ] T E L E P H O N E F E AT U R E S