3) STORE NAME appears and a cursor flashes indicating that the display is ready for the name to be entered.
If the selected speed dial number is already assigned, the Edit screen appears. You can select MAKE A CALL to dial the number, select EDIT MEMORY to edit this entry, select DELETE MEMORY to erase this entry, or select GO BACK to choose another speed dial number.
4)Enter a name according to the instructions below.
•The name can be up to 14 characters.
•Use [∗/tone/
] and [#/
] to move the cursor to the desired location.
•Use [delete/channel] on the cordless handset ([ 
] (delete) on the base) to delete characters as needed.
•Press and hold [delete/channel] on the cordless handset ([ 
] (delete) on the base) to delete all the characters.
•If no name is required, go to step 5.
Refer to the letters on the number keys to select the desired characters.
Each time you press a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key.
If you make a mistake while entering a name
Use [∗/tone/
] and [#/
] to move the cursor to the incorrect character.
Press [delete/channel] on the cordless handset ([ 
] (delete) on the base) to erase the wrong character. Then enter the correct character. To delete all characters, press and hold [delete/channel] on the cordless handset ([ 
] (delete) on the base).
[25]
SSE17+1 OM.indb 25 | 15/7/08 12:08:33 PM |