Uniden SSE17+1 manual Installing the Rechargeable Battery for Cordless Handset

Page 55

Warning: To avoid the risk of personal injury or property damage from ﬁre or electrical shock, only use the Uniden battery model and Uniden adapter model speciﬁcally designated for this product.

Caution:

•Use only the speciﬁed Uniden battery pack (BT-905S).

•Do not remove the batteries from the handset to charge it.

•Never throw the battery into a ﬁre, disassemble, or heat it.

•Do not remove or damage the battery casing.

Installing the Rechargeable Battery for Cordless Handset

1) Press down on the cordless handset battery case

cover (use the ﬁnger indention for a better grip) and slide the cover downward to remove.

2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment. (The connector notches ﬁt into the grooves of the jack only

one way.) Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection.

3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.

4) Place the battery case cover back on the handset and slide it upwards until it clicks into place.

Note: Use only the Uniden BT-905S rechargeable battery pack supplied with your cordless telephone.

[54]

SSE17+1 OM.indb 54

15/7/08 12:08:47 PM

Image 55

Contents SSE17+1 Contents Index Remote Operation Card Warranty MaintenanceTroubleshooting PrecautionsWelcome Terminology Answering Machine Features Main Phone FeaturesProduct Overview Greet key 18. ﬂash key Page/hold key Redial/pause key Parts of the Base and Corded HandsetTop view Use light Cid keyVisual ringer hi/lo/off switch Ringer tone button DC in 9V jack Ringer on/off switchSide and Rear view Delete/channel key Select/intercom key Audio boost on/off switchParts of the Cordless Handset Redial/pause key 11. ∗/tone/ key Memory keyParts of the Cordless Handset Charging Cradle Using the Base Menus Using the InterfaceUsing the Handset Menus Choosing the Best Location Installing the PhoneConnecting the Base and Corded Handset Testing the Connection Adjusting the Visual Ringer Brightness Wall Mounting the Base Direct Wall Mounting Connecting the Cordless Handset and Charger Installing the Optional Headset Installing the BeltclipSetting the Day and Time Base only SetupAdjusting the Base Display LCD Contrast Insert Name TagSetting AutoTalk Handset only Setting Caller ID on Call Waiting Cidcw Base onlyEmergency Dialing From the Base & Cordless Handset One-touch Speed Dialing from the Base Storing Names and Numbers for Speed Dialing Speed Dialing from the MemoryIf you make a mistake while entering a name Speed DIA Storing Caller ID Information to Speed Dial Locations During a Power Failure Using Your PhoneReceiving a Making and Receiving CallsMaking a CallEasy dialing To cancel speed dialingMaking a Call from the Base One-Touch Speed Dial Locations Handset select/ or selectMaking a Call from a Caller ID Listing Call WaitingPress redial/pause Redialing the Last Number DialedAdjusting the Base Ringer Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Handset Ring Tone and Volume Audio Boost for the Cordless Handset Adjusting the Earpiece and Speaker VolumeTemporarily Muting the Base Ringer Finding the Lost Handset Selecting a Different ChannelPlacing a Call on Hold from the Base Exiting ConferencingJoining a Conference Call ConferenceMaking an Intercom IntercomAnswering and Hanging up an Intercom Transferring a CallCordless Handset Using Caller ID and Call WaitingViewing Caller ID Information Deleting Information from the Caller ID List To Delete the entire Caller ID List Features Setting Up the Answering MachineActivating Call Screening Setting the Record Time or Announce OnlyActivating the Message Alert Setting the Number of RingsTo Record a Personal Greeting Setting Your GreetingSelecting Your Greeting Setting a Security Code or Personal Identiﬁcation Number PINTurning your Answering System On & Off Using Your Answering MachineTurning On Turning Off Messages Reviewing MessagesRemotely Operating Your Answering Machine Screening CallsSSE17+1 OM.indb 15/7/08 120846 PM Power Failure MaintenanceSpeciﬁcations Low battery alert Battery LifeBattery Replacement and Handling Installing the Rechargeable Battery for Cordless Handset Cleaning the Battery Charging Contacts Traveling Out of Range TroubleshootingCommon Issues Symptom SuggestionSymptom Suggestion SSE17+1 OM.indb 15/7/08 120849 PM Cordless Handset Base Liquid DamageImportant Safety Instructions PrecautionsRechargeable Nickel-Cadmium Battery Warning O, P, Q IndexF, G, H K, LRemote Operation Card Memory Location Memo Remote Operation CardTask Key Memo Memo ONE Year Limited Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited