Liquid Damage
Moisture and liquid can damage your cordless phone.
•If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.
•If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below:
| Cordless Handset |
| Base |
|
|
|
|
1) | Remove the battery cover and leave it off for | 1) | Disconnect the AC adapter from the base, cutting |
| ventilation. |
| off electrical power. |
2) | Disconnect the battery pack. Leave the battery | 2) | Disconnect the telephone cord from the base. |
| cover off and the battery pack disconnected for at | ||
|
|
| |
| least 3 days. | 3) | Let dry for at least 3 days. |
3) | Once the handset is completely dry, reconnect the |
|
|
| battery pack and the battery cover. |
|
|
4) | Recharge the handset’s battery pack for 15 to 20 |
|
|
| hours before using. |
|
|
|
|
|
|
IMPORTANT:
You must unplug the telephone line while recharging the battery packs to avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please see inside back cover or visit www.uniden.com.au for Australian model or www.uniden. co.nz for New Zealand model for contact information.
[59]
SSE17+1 OM.indb 59 | 15/7/08 12:08:49 PM |