Uniden UH041 manual Getting Started, Battery Installation, Into the mains power

Page 3

Color profile: Disabled

Composite Default screen

GETTING STARTED

Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture.

BATTERY INSTALLATION

Your UH041/UHO41P radio uses 4 AAA ALKALINE or optional NiMH battery pack (UH041P includes NiMH battery pack) batteries for power.

To avoid damage to the unit do not mix old and new batteries.

To install the batteries:

1. Make sure your radio is off.

2. Remove the battery compartment door by pressing the tab at the bottom of the compartment door allowing the door to be removed.

3. Insert 4 AAA ALKALINE batteries according to the polarity symbols inside the battery compartment.

4. Replace the battery cover.

Do not charge alkaline or non rechargeable batteries.

INSTALLING THE CHARGE CRADLE (UH041P only)

￿ Install the NiMH Battery Pack as per above instructions. ￿ Plug the AC Adaptor into the rear of the charge cradle and

into the mains power.

2

UH041 Manual.prn

UH041 Manual - UT01912AZ

Monday, October 13, 2003 6:52:20 PM

Image 3
Contents UH041 UH041P Please check which model you have UH041 or UH041P Included in Your PackageGetting Started Battery InstallationTo install the batteries Make sure your radio is off Into the mains powerBelt Clip LOW Battery AlertOperation Power ON/OFFVolume Adjusting the KEY BeepsSelecting Channel To Transmit and ReceivePress channel or to select the desired channel Monitor Automatic Squelch FeatureNormal operation To Operate in Duplex ModePress Or PTT to cancel Scanning ScanningReply Delay Power SaveIndicator Press Channel To turn the unit Press To confirm the selected settingVOX Keylock ON/OFFUHF Channels & Frequencies Uniden UH041/UH041P UHF CB Radio Warranty