Uniden UH041 manual Selecting Channel, To Transmit and Receive

Page 6

Color profile: Disabled

Composite Default screen

SELECTING CHANNEL

Press channel or to select the desired channel.

hi/lo

 

dup

mon

channel/

volume

scan

 

TO TRANSMIT AND RECEIVE

The UH041/UHO41P uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed on page 10.

1.Before you transmit, listen for activity on the selected channel.

2.When the channel is clear, press and hold the PTT to transmit. 'TX' appears on the LCD.

PTT

Switch

TX

hi/lo

dup mon

channel/

volume

scan

 

Hold the radio with microphone approximately 5 cm in front of your mouth with the antenna at approximately 45° angle away from your head. Speak in a clear, normal conversational voice.

3.When you have finished speaking, release the PTT and listen for a response. 'TX' then disappears on the LCD.

Note: While receiving, the 'RX' icon is displayed

5

UH041 Manual.prn

UH041 Manual - UT01912AZ

Monday, October 13, 2003 6:52:26 PM

Page 5 Page 7
Image 6
Page 5 Page 7
Contents UH041 UH041P Included in Your Package Please check which model you have UH041 or UH041PInto the mains power Battery InstallationTo install the batteries Make sure your radio is off Getting StartedLOW Battery Alert Belt ClipAdjusting the KEY Beeps Power ON/OFFVolume OperationSelecting Channel To Transmit and ReceivePress channel or to select the desired channel Automatic Squelch Feature MonitorScanning To Operate in Duplex ModePress Or PTT to cancel Scanning Normal operationReply Delay Power SaveIndicator Press Channel Keylock ON/OFF Press To confirm the selected settingVOX To turn the unitUHF Channels & Frequencies Warranty Uniden UH041/UH041P UHF CB Radio
Top Page Image Contents