Uniden UH041 manual Belt Clip, LOW Battery Alert

Page 4

Color profile: Disabled

Composite Default screen

dup

mon

channel/

volume

scan

 

charge 1

charge 2

 

Power Point

Place the UH041P into the charge cradle. The charge light will come on to indicate the unit is charging. Before operating the UH041P, charge the battery pack for 16 hours.

Do not charge alkaline or non rechargeable batteries.

BELT CLIP

To attach the belt clip:

Slide the belt clip until it snaps into place. Belt Clip Locker

To remove the belt clip:

To remove the belt clip. Press and hold belt clip locker, slide the belt clip at the same time until released.

LOW BATTERY ALERT

If the Battery level becomes low, the battery indicator icon on the LCD begins flashing..

When the batteries in the unit are low, the unit will go into a Battery Low Mode. The Transmit Mode is disabled. Replace the alkaline batteries immediately or if you are using the NiMH Battery pack, place the Radio on the charge cradle to recharge (supplied with UHO41P, optional accessory for UH041) to continue using the radio.

3

UH041 Manual.prn

UH041 Manual - UT01912AZ

Monday, October 13, 2003 6:52:22 PM

Image 4
Contents UH041 UH041P Included in Your Package Please check which model you have UH041 or UH041PBattery Installation To install the batteries Make sure your radio is offInto the mains power Getting StartedLOW Battery Alert Belt ClipPower ON/OFF VolumeAdjusting the KEY Beeps OperationTo Transmit and Receive Selecting ChannelPress channel or to select the desired channel Automatic Squelch Feature MonitorTo Operate in Duplex Mode Press Or PTT to cancel ScanningScanning Normal operationPower Save Reply DelayIndicator Press Channel Press To confirm the selected setting VOXKeylock ON/OFF To turn the unitUHF Channels & Frequencies Warranty Uniden UH041/UH041P UHF CB Radio